Fuel Nozzle for Pressure Washer Burner (Hollow Tip, 90 Degree Spray)
This Hollow Cone Type A Atomizing Fuel Nozzle mixes fuel and air to turn the fuel into a combustible mist. It is designed and dimensioned to deliver a fixed amount of atomized fuel to the combustion chamber within approximately plus or minus 5% of rated capacity at a 90 degree spray angle.
Type A Hollow cone nozzles can be used in burners with a hollow air pattern and also for use in small burners (those firing 1.00 GPH and under), regardless of air pattern. Hollow cone nozzles generally have more stable spray angles and patterns under adverse conditions than solid cone nozzles of the same flow rate. This is an important advantage in fractional gallonage nozzles where high viscosity fuel may cause a reduction in spray angle and an increase in droplet size. Type A nozzles produce a spray which delivers fine droplets outside the periphery of the main spray cone. These fine droplets greatly enhance ignition and create a stable flame for use with flame retention burners.