The Contractor's #1 Source for Commercial Pressure Washers, Pressure Washer Supplies & Training!

Annovi Reverberi AR VRT3-250 Unloader Valve 3650 PSI

Annovi Reverberi AR VRT3-250 Unloader Valve 3650 PSI
$54.99
With a new interior design for more efficient flow & operation and a more fatigue-resistant spring with powder paint to resist rusting, this 3650 PSI Unloader Valve is a great choice.
Description

Details

With a new interior design for more efficient flow & operation and a more fatigue-resistant spring with powder paint to resist rusting, this 3650 PSI Unloader Valve is a great choice. Other NEW! features of this VRT3 Series of Unloader Valves include:

  • Vibration resistant dual locking nuts for setting maximum pressures
  • Larger diameter piston for more strength and contact area for shifting alignment
  • Discharge nipple sealing o-ring has been moved to the lower part of the thread to increase hydro strength and fitting strength
  • Shutter valve hex design means less contact area for smooth shifting (prevents binding), larger size for longer life more positive shifting

Other features include:

  • Over sized handle for easier adjustment
  • Forged valve body for excellent strength
  • Two inlet ports
  • Two by-pass ports
  • Ultra thick inlet and discharge ports for added strength
  • Color coded springs and caps for easy valve identification
  • All ports are FNPT

Specifications:

  • Maximum PSI: 3650
  • Maximum GPM: 8
  • Maximum Temperature: 194 F
  • Inlet: 2x3/8" F
  • Outlet: 3/8" F
  • Spring Color: Blue:
  • Includes Knob: Yes
Additional Information

Additional Information

SKU VRT3-250
Brand Annovi Reverberi

Annovi Reverberi AR VRT3-250 Unloader Valve 3650 PSI. With a new interior design for more efficient flow & operation and a more fatigue-resistant spring with powder paint to resist rusting, this 3650 PSI Unloader Valve is a great choice.

  • Price: $54.99 - In stock
  • Brand: Annovi Reverberi
  • Product ID: BAPL-5056
Product Questions

Product Questions

Hi there,
I noticed that some unloaders are mounted horizontally and then there are some installed vertically. I've am ready to install an AR VRT3-250 unloader valve on a Landa PGHW5-3000 skid with a General pump T series 47S model #TS2021N (Ni-plated) manifold. Specs:4.5gpm/3500 psi.@1125 rpm,5.6gpm/3500 psi.@ 1450 rpm.,max.inlet vacuum 9 ft.water (7.9in.Hg.). Would like to know which category, horizontal or vertical mine falls under? The original unloader was in the horizontal position but in the manual I found online it shows vertically. The online manual also shows a hose running between the discharge port of manifold & bypass port of unloader, another hose between chem.assbly.inlet port of manifold & inlet port of unloader block. I believe these are in error. Also believe my unloader should be installed in vertically but please advise if possible. My sincere thanks in advance.
Kevin K.
-19
REVIEWS

You may also be interested in the following product(s)